-- SUN2232 control MIB.
--
-- Author                   Date        Comment
-- ==================================================================
-- SUN2232 Monitoring         03/04/2017  
--

etherpower DEFINITIONS ::= BEGIN

IMPORTS
   enterprises, IpAddress, Gauge, TimeTicks     FROM RFC1155-SMI
   DisplayString                                FROM RFC1213-MIB
   OBJECT-TYPE                                  FROM RFC-1212
   TRAP-TYPE                                    FROM RFC-1215;

etherpower                     OBJECT IDENTIFIER ::=  { enterprises 38815 }

product                     OBJECT IDENTIFIER ::=  { etherpower 1 }
setup                       OBJECT IDENTIFIER ::=  { etherpower 2 }
control                     OBJECT IDENTIFIER ::=  { etherpower 3 }
deviceinfo                  OBJECT IDENTIFIER ::=  { etherpower 4 }

sensors						OBJECT IDENTIFIER ::=  { setup 1 }
digitals					OBJECT IDENTIFIER ::=  { setup 2 }
outputs						OBJECT IDENTIFIER ::=  { setup 3 }
analogs						OBJECT IDENTIFIER ::=  { setup 4 }

sensor1						OBJECT IDENTIFIER ::=  { sensors 1 }
sensor2						OBJECT IDENTIFIER ::=  { sensors 2 }

diginput1					OBJECT IDENTIFIER ::=  { digitals 1 }
diginput2					OBJECT IDENTIFIER ::=  { digitals 2 }

output1						OBJECT IDENTIFIER ::=  { outputs 1 }
output2						OBJECT IDENTIFIER ::=  { outputs 2 }

aninput1					OBJECT IDENTIFIER ::=  { analogs 1 }
aninput2					OBJECT IDENTIFIER ::=  { analogs 2 }

--ON-OFF          ::=   INTEGER { on(1), off(0) }

PositiveInteger ::= INTEGER (1..2147483647)	-- 0x7FFF FFFF


name    OBJECT-TYPE
   SYNTAX DisplayString
   ACCESS read-only
   STATUS mandatory
   DESCRIPTION
      "Name of product. e.g. etherpower etc."
   ::= { product 1 }
   

version    OBJECT-TYPE
   SYNTAX DisplayString
   ACCESS read-only
   STATUS mandatory
   DESCRIPTION
      "Version string. e.g. 1.0"
   ::= { product 2 }

deviceMACAddress OBJECT-TYPE
	SYNTAX	OCTET STRING (SIZE(6))
	ACCESS	read-only
	STATUS	mandatory
	DESCRIPTION
		"Device MAC address."
	::= { deviceinfo 1 }   
	
sens1ID OBJECT-TYPE
	SYNTAX  OCTET STRING (SIZE(6))
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"Temperature sensor ID."
	::= { sensor1 1 } 
	
sens1Name OBJECT-TYPE
	SYNTAX  DisplayString (SIZE (0..18))
	ACCESS read-write
	STATUS mandatory
	DESCRIPTION
		"Temperature sensor Name."
	::= { sensor1 2 } 
	
temp1Lower OBJECT-TYPE
	SYNTAX  INTEGER ( -400..1250 )
	ACCESS read-write
	STATUS mandatory
	DESCRIPTION
		"Temperature low range in integer (decimal x 10) format."
	::= { sensor1 3 }  
	
temp1Upper OBJECT-TYPE
	SYNTAX  INTEGER ( -400..1250 )
	ACCESS read-write
	STATUS mandatory
	DESCRIPTION
		"Temperature upper range in integer (decimal x 10) format."
	::= { sensor1 4 }  
	
temp1Hyst OBJECT-TYPE
	SYNTAX  INTEGER ( 0..1250 )
	ACCESS read-write
	STATUS mandatory
	DESCRIPTION
		"Temperature hysteresis in integer (decimal x 10) format."
	::= { sensor1 5 } 
	
temp1Email OBJECT-TYPE
	SYNTAX  INTEGER { no(0), yes(1) }
	ACCESS read-write
	STATUS mandatory
	DESCRIPTION
		"Temperature email alarm alert."
	::= { sensor1 6 } 
	
temp1Trap OBJECT-TYPE
	SYNTAX  INTEGER { no(0), yes(1) }
	ACCESS read-write
	STATUS mandatory
	DESCRIPTION
		"Temperature trap alarm alert."
	::= { sensor1 7 } 

humi1Lower OBJECT-TYPE
	SYNTAX  INTEGER ( 0..1000 )
	ACCESS read-write
	STATUS mandatory
	DESCRIPTION
		"Humidity low range in integer (decimal x 10) format."
	::= { sensor1 8 } 
	
humi1Upper OBJECT-TYPE
	SYNTAX  INTEGER ( 0..1000 )
	ACCESS read-write
	STATUS mandatory
	DESCRIPTION
		"Humidity upper range in integer (decimal x 10) format."
	::= { sensor1 9 } 
	
humi1Hyst OBJECT-TYPE
	SYNTAX  INTEGER ( 0..1000 )
	ACCESS read-write
	STATUS mandatory
	DESCRIPTION
		"Humidity hysteresis in integer (decimal x 10) format."
	::= { sensor1 10 } 
	
humi1Email OBJECT-TYPE
	SYNTAX  INTEGER { no(0), yes(1) }
	ACCESS read-write
	STATUS mandatory
	DESCRIPTION
		"Humidity email alarm alert."
	::= { sensor1 11 }
	
humi1Trap OBJECT-TYPE
	SYNTAX  INTEGER { no(0), yes(1) }
	ACCESS read-write
	STATUS mandatory
	DESCRIPTION
		"Humidity trap alarm alert."
	::= { sensor1 12 } 	
		
sens2ID OBJECT-TYPE
	SYNTAX  OCTET STRING (SIZE(6))
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"Temperature sensor ID."
	::= { sensor2 1 } 
		
sens2Name OBJECT-TYPE
	SYNTAX  DisplayString (SIZE (0..18))
	ACCESS read-write
	STATUS mandatory
	DESCRIPTION
		"Temperature sensor Name."
	::= { sensor2 2 }
	
temp2Lower OBJECT-TYPE
	SYNTAX  INTEGER ( -400..1250 )
	ACCESS read-write
	STATUS mandatory
	DESCRIPTION
		"Temperature low range in integer (decimal x 10) format."
	::= { sensor2 3 }  	
	
temp2Upper OBJECT-TYPE
	SYNTAX  INTEGER ( -400..1250 )
	ACCESS read-write
	STATUS mandatory
	DESCRIPTION
		"Temperature upper range in integer (decimal x 10) format."
	::= { sensor2 4 }  
	
temp2Hyst OBJECT-TYPE
	SYNTAX  INTEGER ( 0..1250 )
	ACCESS read-write
	STATUS mandatory
	DESCRIPTION
		"Temperature hysteresis in integer (decimal x 10) format."
	::= { sensor2 5 } 
	
temp2Email OBJECT-TYPE
	SYNTAX  INTEGER { no(0), yes(1) }
	ACCESS read-write
	STATUS mandatory
	DESCRIPTION
		"Temperature email alarm alert."
	::= { sensor2 6 } 
	
temp2Trap OBJECT-TYPE
	SYNTAX  INTEGER { no(0), yes(1) }
	ACCESS read-write
	STATUS mandatory
	DESCRIPTION
		"Temperature trap alarm alert."
	::= { sensor2 7 } 
	
humi2Lower OBJECT-TYPE
	SYNTAX  INTEGER ( 0..1000 )
	ACCESS read-write
	STATUS mandatory
	DESCRIPTION
		"Humidity low range in integer (decimal x 10) format."
	::= { sensor2 8 } 
	
humi2Upper OBJECT-TYPE
	SYNTAX  INTEGER ( 0..1000 )
	ACCESS read-write
	STATUS mandatory
	DESCRIPTION
		"Humidity upper range in integer (decimal x 10) format."
	::= { sensor2 9 } 
	
humi2Hyst OBJECT-TYPE
	SYNTAX  INTEGER ( 0..1000 )
	ACCESS read-write
	STATUS mandatory
	DESCRIPTION
		"Humidity hysteresis in integer (decimal x 10) format."
	::= { sensor2 10 } 
	
humi2Email OBJECT-TYPE
	SYNTAX  INTEGER { no(0), yes(1) }
	ACCESS read-write
	STATUS mandatory
	DESCRIPTION
		"Humidity email alarm alert."
	::= { sensor2 11 }
	
humi2Trap OBJECT-TYPE
	SYNTAX  INTEGER { no(0), yes(1) }
	ACCESS read-write
	STATUS mandatory
	DESCRIPTION
		"Humidity trap alarm alert."
	::= { sensor2 12 } 		
	
tempUnit OBJECT-TYPE
    SYNTAX INTEGER { celcius(0), fahrenheit(1) }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "Temperature sensor unit."
    ::= { sensors 3 }
		
input1Name OBJECT-TYPE
    SYNTAX DisplayString (SIZE (0..16))
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "Name of digital input 1."
    ::= { diginput1 1 }
	
input1AlarmState OBJECT-TYPE
    SYNTAX INTEGER { disabled(0), activeIfClosed(1) }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "Alarm state ot digital input 1."
    ::= { diginput1 2 }
	
input1TrapEnable OBJECT-TYPE
    SYNTAX INTEGER { no(0), yes(1) }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "Enable trap from digital input 1."
    ::= { diginput1 3}
	
input1MailEnable OBJECT-TYPE
    SYNTAX INTEGER { no(0), yes(1) }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "Enable mail from digital input 1."
    ::= { diginput1 4}
	
input2Name OBJECT-TYPE
    SYNTAX DisplayString (SIZE (0..16))
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "Name of digital input 2."
    ::= { diginput2 1 }
	
input2AlarmState OBJECT-TYPE
    SYNTAX INTEGER { disabled(0), activeIfClosed(1) }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "Alarm state ot digital input 2."
    ::= { diginput2 2 }
		
input2TrapEnable OBJECT-TYPE
    SYNTAX INTEGER { no(0), yes(1) }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "Enable trap from digital input 2."
    ::= { diginput2 3}
	
input2MailEnable OBJECT-TYPE
    SYNTAX INTEGER { no(0), yes(1) }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "Enable mail from digital input 2."
    ::= { diginput2 4}
	
out1Name OBJECT-TYPE
    SYNTAX DisplayString (SIZE (0..16))
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "Name of relay 1 output."
    ::= { output1 1 }
	
out1Control	OBJECT-TYPE
    SYNTAX INTEGER { manual(0), dryContactInput(1), dryContactInput(2), analogInput1(3), analogInput2(4), sens1temp(5), sens1hum(6), sens2temp(7), sens2hum(8), allSensors(9)}
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "Setup control of relay 1."
    ::= { output1 2}
	
out2Name OBJECT-TYPE
    SYNTAX DisplayString (SIZE (0..16))
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "Name of relay 1 output."
    ::= { output2 1 }
		
out2Control	OBJECT-TYPE
    SYNTAX INTEGER { manual(0), dryContactInput(1), dryContactInput(2), analogInput1(3), analogInput2(4), sens1temp(5), sens1hum(6), sens2temp(7), sens2hum(8), allSensors(9)}
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "Setup control of relay 1."
    ::= { output2 2}

analog1Name OBJECT-TYPE
	SYNTAX  DisplayString (SIZE (0..18))
	ACCESS read-write
	STATUS mandatory
	DESCRIPTION
		"Analog 1 input Name"
	::= { aninput1 1 } 
	
analog1Lower OBJECT-TYPE
	SYNTAX  INTEGER ( 0..60000 )
	ACCESS read-write
	STATUS mandatory
	DESCRIPTION
		"Analog 1 low range in integer (decimal x 1000) format."
	::= { aninput1 2 }  
	
analog1Upper OBJECT-TYPE
	SYNTAX  INTEGER ( 0..60000 )
	ACCESS read-write
	STATUS mandatory
	DESCRIPTION
		"Analog 1 upper range in integer (decimal x 1000) format."
	::= { aninput1 3 }  
	
analog1Hyst OBJECT-TYPE
	SYNTAX  INTEGER ( 0..60000 )
	ACCESS read-write
	STATUS mandatory
	DESCRIPTION
		"Analog 1 hysteresis in integer (decimal x 1000) format."
	::= { aninput1 4 } 
	
analog1Email OBJECT-TYPE
	SYNTAX  INTEGER { no(0), yes(1) }
	ACCESS read-write
	STATUS mandatory
	DESCRIPTION
		"Analog 1 email alarm alert."
	::= { aninput1 5 } 
	
analog1Trap OBJECT-TYPE
	SYNTAX  INTEGER { no(0), yes(1) }
	ACCESS read-write
	STATUS mandatory
	DESCRIPTION
		"Analog 1 trap alarm alert."
	::= { aninput1 6 } 
	
analog2Name OBJECT-TYPE
	SYNTAX  DisplayString (SIZE (0..18))
	ACCESS read-write
	STATUS mandatory
	DESCRIPTION
		"Analog 2 input Name"
	::= { aninput2 1 } 
	
analog2Lower OBJECT-TYPE
	SYNTAX  INTEGER ( 0..60000 )
	ACCESS read-write
	STATUS mandatory
	DESCRIPTION
		"Analog 2 low range in integer (decimal x 1000) format."
	::= { aninput2 2 }  
	
analog2Upper OBJECT-TYPE
	SYNTAX  INTEGER ( 0..60000 )
	ACCESS read-write
	STATUS mandatory
	DESCRIPTION
		"Analog 1 upper range in integer (decimal x 1000) format."
	::= { aninput2 3 }  
	
analog2Hyst OBJECT-TYPE
	SYNTAX  INTEGER ( 0..60000 )
	ACCESS read-write
	STATUS mandatory
	DESCRIPTION
		"Analog 2 hysteresis in integer (decimal x 1000) format."
	::= { aninput2 4 } 
	
analog2Email OBJECT-TYPE
	SYNTAX  INTEGER { no(0), yes(1) }
	ACCESS read-write
	STATUS mandatory
	DESCRIPTION
		"Analog 2 email alarm alert."
	::= { aninput2 5 } 
	
analog2Trap OBJECT-TYPE
	SYNTAX  INTEGER { no(0), yes(1) }
	ACCESS read-write
	STATUS mandatory
	DESCRIPTION
		"Analog 2 trap alarm alert."
	::= { aninput2 6 } 
		
configSaved OBJECT-TYPE
	SYNTAX INTEGER { no(0), yes(1) }
	ACCESS read-write
	STATUS mandatory
	DESCRIPTION
		"Configuration save status YES/NO"
	::= { setup 5 }
	
output1 OBJECT-TYPE
    SYNTAX INTEGER { off(0), on(1) }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION 
        "OUT1 - Relay1"
    ::= { control 1 }
	
output2 OBJECT-TYPE
    SYNTAX INTEGER { off(0), on(1) }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION 
        "OUT2 - Relay2"
    ::= { control 2 }

dryContactInput1 OBJECT-TYPE
	SYNTAX  INTEGER { closed(0), open(1) }
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"Dry contact input 1"
	::= { control 3 } 	
	
dryContactInput2 OBJECT-TYPE
	SYNTAX  INTEGER { closed(0), open(1) }
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"Dry contact input 2"
	::= { control 4 } 

volt1 OBJECT-TYPE
    SYNTAX INTEGER
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION 
        "Voltage1 in integer (decimal x 1000) format"
    ::= { control 5 }

volt2 OBJECT-TYPE
    SYNTAX INTEGER
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION 
        "Voltage2 in integer (decimal x 1000) format"
    ::= { control 6 }

temperature1 OBJECT-TYPE
	SYNTAX  INTEGER( -400..1250 )
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"Sensor1 Temperature in integer (decimal x 10) format"
	::= { control 7 } 	
	
humidity1 OBJECT-TYPE
	SYNTAX  INTEGER( 0..1000 )
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"Sensor1 Humidity in integer (decimal x 10) format"
	::= { control 8 } 
	
temperature2 OBJECT-TYPE
	SYNTAX  INTEGER( -400..1250 )
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"Sensor2 Temperature in integer (decimal x 10) format"
	::= { control 9 } 	
	
humidity2 OBJECT-TYPE
	SYNTAX  INTEGER( 0..1000 )
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"Sensor2 Humidity in integer (decimal x 10) format"
	::= { control 10 } 
	
in1Alarm TRAP-TYPE
        ENTERPRISE etherpower
        VARIABLES  {dryContactInput1}
        DESCRIPTION
			"Dry contact input 1 entered alarm condition"
       ::=  1
	   	   
in2Alarm TRAP-TYPE
        ENTERPRISE etherpower
        VARIABLES  {dryContactInput2}
        DESCRIPTION
			"Dry contact input 2 entered alarm condition"
       ::=  2
	   
volt1Alarm	TRAP-TYPE
        ENTERPRISE etherpower
        VARIABLES  {volt1}
        DESCRIPTION
            "Analog Input 1 entered alarm condition"
       ::=  3
	   
volt2Alarm	TRAP-TYPE
        ENTERPRISE etherpower
        VARIABLES  {volt2}
        DESCRIPTION
            "Analog Input 2 entered alarm condition"
       ::=  4	
	   
sens1TempAlarm TRAP-TYPE
        ENTERPRISE etherpower
        VARIABLES  {temperature1}
        DESCRIPTION
            "Sensor 1 Temperature entered alarm condition"
       ::=  5
	      
sens1HumidityAlarm TRAP-TYPE
        ENTERPRISE etherpower
        VARIABLES  {humidity1}
        DESCRIPTION
            "Sensor 1 Humidity entered alarm condition"
       ::=  6	

sens2TempAlarm TRAP-TYPE
        ENTERPRISE etherpower
        VARIABLES  {temperature2}
        DESCRIPTION
            "Sensor 2 Temperature entered alarm condition"
       ::=  7	 
     
sens2HumidityAlarm TRAP-TYPE
        ENTERPRISE etherpower
        VARIABLES  {humidity2}
        DESCRIPTION
            "Sensor 2 Humidity entered alarm condition"
       ::=  8		   

END